DEK-REL- 24/1/AKT

https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Relay terminal block for actuator, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage 24 V AC/DC, for assembly on NS 35/7.5, terminal width 6.2 mm Product Features  Reduced costs as N terminal block is no longer required  Wiring reduced to a minimum  Up to 73% more space  2 kVrms electrical isolation between input and output  2-layer contact with hard gold plating for universal applications from 1 mA to 5 A continuous current  Integrated input circuit     Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 24.72 GRM Custom tariff number 85364190 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm 10/10/2014   Page 1 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Technical data Dimensions Depth 56 mm Ambient conditions Ambient temperature (operation) -20 °C ... 50 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Coil side Nominal input voltage UN 24 V AC/DC 24 V DC 24 V AC Input voltage range in reference to UN 0.8 ... 1.1 Typical input current at UN 6.5 mA Typical response time 5 ms Typical release time 15 ms Operating voltage display Yellow LED Protective circuit Bridge rectifier Bridge rectifier Contact side Contact type 1 N/O contact Contact material AgNi, hard gold-plated Maximum switching voltage 250 V AC 125 V DC Minimum switching voltage 0.1 V Maximum inrush current 5A Min. switching current 1 mA Limiting continuous current 3 A (5 A up to 35°C at 24 V DC) Interrupting rating (ohmic load) max. 72 W (at 24 V DC) 60 W (at 48 V DC) 50 W (at 60 V DC) 50 W (at 110 V DC) 750 VA (for 250 V AC) 120 W (at 24 V DC - up to 35°) General Test voltage relay winding/relay contact 2 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life Approx. 2 x 10 cycles Standards/regulations IEC 60664 7 EN 50178 10/10/2014   Page 2 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Technical data General IEC 62103 Rated surge voltage / insulation Basic insulation Pollution degree 2 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing Connection data Connection method Screw connection Stripping length 8 mm Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil max 14 Conductor cross section AWG/kcmil min. 24 Screw thread M3 Tightening torque max 0.5 Nm Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 10/10/2014   Page 3 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Classifications UNSPSC UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  GOST  cULus Recognized  Accessories Accessories 10/10/2014   Page 4 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Accessories Insertion bridge Insertion bridge - EB 2- DIK RD - 2716693 Insertion bridge, Number of positions: 2, Color: red     Insertion bridge - EB 3- DIK RD - 2716745 Insertion bridge, Number of positions: 3, Color: red     Insertion bridge - EB 4- DIK RD - 2716758 Insertion bridge, Number of positions: 4, Color: red     Insertion bridge - EB 5- DIK RD - 2716761 Insertion bridge, Number of positions: 5, Color: red     Insertion bridge - EB 10- DIK RD - 2716774 Insertion bridge, Number of positions: 10, Color: red     10/10/2014   Page 5 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Accessories Insertion bridge - EB 2- DIK BU - 2716648 Insertion bridge, Number of positions: 2, Color: blue     Insertion bridge - EB 3- DIK BU - 2716651 Insertion bridge, Number of positions: 3, Color: blue     Insertion bridge - EB 4- DIK BU - 2716664 Insertion bridge, Number of positions: 4, Color: blue     Insertion bridge - EB 5- DIK BU - 2716677 Insertion bridge, Number of positions: 5, Color: blue     Insertion bridge - EB 10- DIK BU - 2716680 Insertion bridge, Number of positions: 10, Color: blue     10/10/2014   Page 6 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Accessories Insertion bridge - EB 80- DIK BU - 2715940 Insertion bridge, Number of positions: 80, Color: blue     Insertion bridge - EB 80- DIK RD - 2715953 Insertion bridge, Number of positions: 80, Color: red     Insertion bridge - EB 80- DIK WH - 2715788 Insertion bridge, Number of positions: 80, Color: white     Labeled terminal marker Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Partition plate Separating plate - D-DEK 1,5 GN - 2716949 Cover for setting the end of a terminal row, color: green     10/10/2014   Page 7 / 9 https://www.phoenixcontact.com/us/products/2964063 Relay Module - DEK-REL- 24/1/AKT - 2964063 Accessories Sensor/actuator terminal block Sensor/actuator terminal block - DIKD 1,5 - 2715979 Sensor/actuator terminal block, Cross section:  0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15     Terminal marking Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Drawings Circuit diagram A1 Schematic diagram 13 Signal load Supply (+) 14 PLC OUT -PLC Load Ground load A2 Pin configuration, DEK-REL-...AKT 10/10/2014   Page 8 / 9 https://www.phoenixcontact.com/us/products/2964063 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 9 / 9